Apparel

99 grams-per-shoe. Yes, you read that right: 99 grams. The S-Works EXOS 99 road shoes are the world's lightest production cycling shoes no IFs, ANDs, or BUTs about it. Of course, they still feature all of our Body Geometry features, are ultra-stiff, and have all the pedigree and performance that S-Works is synonymous with. It's the hardest project we've ever completed, which is why we're only going to produce 500 pairs of them. Ever. Just like the EXOS, the carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn't needed. This allowed us to keep crazy-high stiffness numbers, too. We also used two exclusive features, as well as weight restrictions on each size, in order to ensure that each shoe hits its correct weight. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. If you're on the hunt for the highest performance, lightest damn cycling shoes ever developed, look no further than the S-Works EXOS 99. - Exclusively sold via preorder through Specialized Retailers. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase -efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearwards. - Non-slip, replaceable heel tread. - Form Fit last with a Warp Sleeve vamp offers the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 99g (1/2 pair, Size 42)

The Bluegrass Legit Carbon Helmet is a premium race-day full-face helmet. Developed for competitions, it exceeds all of the certifications for racing downhill and enduro. - The Legit Carbon features a flexible safety-release visor to avoid twisting of the neck in impacts from any angle. - Designed with hearing vents to help riders maintain balance and hit their optimum performance levels - The Legit Carbon uses a carbon fiber outer shell paired with a multi-impact EPS liner to achieve the finest blend of high-impact performance and low-weight - Vents and air channeling are optimized for all-day park sessions, with two large exhausts working in synergy with the EPS channels, to keep you cool at both high and low speeds - Featuring the MIPS E5-4® brain protection system, the BLUEGRASS Legit Carbon is able to slide relative to the head in the case of a crash, redirecting damaging rotational motion - The Legit Carbon is suitable for all head shapes and sizes, thanks to its meticulously refined internal shaping - The comfort is boosted even more by the snap-in soft padding - Durability and quality are enhanced by an injected PU foam paired with the chin guard and three polycarbonate shells strategically molded on the EPS liner

For Dissident II, we collaborated with powerhouse athletes, Loïc Bruni and Finn Iles, to design a helmet that would meet the highest demands of downhill mountain bike racing, in terms of confidence, a modern-styled fit, and breathability.With five strategically placed EPS foam inserts, we’re able to tune for higher and lower density foam based on where it is being configured inside the helmet—allowing us to maintain a light weight and still manage energy. The use of a softer foam density allows more energy to be absorbed in an impact, transferring less to the rider. Dissident II also provides added confidence through its Mips Evolve Solution—that helps to redirect rotational movement away from the head. In this Evolve Solution, we utilized fabric pocket attachments inside, reducing creakiness.Remaining cool is more than a state of mind, and it’s hard to keep your composure when things get hot—specially when your head feels like its in a sauna. That’s why instead of focusing on more vents, we focused on better vents. Built from the inside out, the Dissident II ventilation system features a hood scoop to channel a flow of cool air in, and purpose-placed vents that direct the warm air out—letting your head stay cool and comfortable in any situation.Keeping this helmet light was of high importance. In a race context, feeling light and mobile leads to faster reactions, and reduced fatigue between the tape. With the EPS foam insert construction, the helmet remains very light while still offering big protection. While we can’t speculate on everything that was going through Finn Iles’ head during his 2022 winning run at Mont-Sainte-Anne—we know what he wasn’t thinking about… Whether you’re taking the stage to drop in on your first winning World Cup run, or chasing your own championship on the local enduro series, Dissident II has you covered.For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 3 Layer Construction: Carbon Shell / Poly Carbonate / EPS. - 5-unique pieces of EPS tuned to optimized performance in each specific location. - Mips Evolve Solution: Fabric pocket attachments to reduce bobble head and creakiness. - Ionic Plus Fabric anti-microbial pad kit. Replacement crown pad and two sizes of emergency quick-release cheek pads included. - Breathability optimized with hood scoop. - Sizes: S, M, L, XL (4 Shell sizes). - Travel Bag. - D-Ring Buckle. - Weight: Medium - 940g.

Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice - Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air - On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

Whether it's a sweltering climb at the Vuelta or a toasty afternoon in your hometown, we developed the S-Works 7 Vent to keep you comfortable on even the hottest days. With new features like the Vented Mouthport toe box and an all-new engineered mesh upper, the S-Works 7 Vent delivers exceptional ventilation and aides in sweat evaporation. Pair that with World-Tour-proven features like our Body Geometry Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button, the PadLock heel, a FACT Powerline carbon outsole, and machined alloy BOA S3-Snap dials, and you're set for any ride or race, no matter how high the mercury rises. For power transfer, our PadLock heel construction cradles the heel to ensure optimal power transfer. In fact, its been scientifically-proven to improve acceleration. Pair that with two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee, and you can fine-tune your level of foot-hold on-the-fly. The Vented Mouthport toe box pulls air in through the front of the shoe and channels it around your feet, while the entirely-new, engineered mesh upper and tongue let that air flow freely throughout the shoe, aiding in both cooling and sweat evaporation. Along with the engineered mesh in the upper, we added a layer of Dyneema Mesh to keep strong hold of your foot, ensuring pro-proven power transfer. The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry Features, Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Non-slip, replaceable heel tread with internally recessed screws for security. - Three-bolt cleat pattern fits all major road pedals. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Uses the same 66-gram FACT Powerline carbon outsole found in our EXOS line. With its mesh-covered ventilation holes, the sole furthers the shoe's cooling properties, all while dropping weight to 233 grams (1/2 pair, Size 42).

Feast your eyes on the all new Garneau Tri Air Lite Shoes. LG took their best-selling Tri-400 shoe and gave it all the upgrades you could ever imagine. Some would even call it space grade, and we guarantee it’ll get you from T1 to T2 cooler, faster, stronger, and way more comfortable than anything you’ve ever seen. Technical Details: - Shoe Technology : Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 8.3 oz/235 g - What's Included: Shoe bag included - Outsole: Patented Carbon Air Lite composite extremely ventilated outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Closure System: Boa L6 micro-adjustment, Hook and loop straps: Easy to adjust

The MET Parachute MCR is MET's convertible full-face helmet developed for enduro, all-mountain and e-MTB riding. Parachute MCR is designed to be truly two helmets in one. The full-face has a stylish and aggressive look providing all-round protection, while the open face reflects the style of MET's all-mountain helmets. MCR stands for Magnetic Chinbar Release and instantly converts from full to open face helmet and back. MCR is MET's revolutionary system created in partnership with Fidlock. Featuring the MIPS brain protection system and complying with ASTM 1952-15/2032-15 (shell and chinbar), riders have the highest level of protection from linear and rotational impacts. In addition, MET's unique flexible injected visor to avoid extra rotation of the neck in case of a crash. The BOA FS1 offers incremental adjustment forward and backward to deliver a precise and adaptable fit, while the belt runs 360° around the head to avoid any pressure points, optimizing comfort. It also offers 3 positions for vertical adjustment. 21 vents and the MET engineered internal air channeling work in synergy with the breathable chinbar to maximize the airflow at low and high speed. The chinbar is engineered to reach the optimal balance of stiffness and energy dissipation to give riders confidence when wearing the Parachute MCR. - In-mold polycarbonate shell with EPS liner - MCR Magnetic Chinbar Release System allows the helmet to easily convert from a full face to open face design - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - ASTM 1952-15/2032-15 certified shell and chinbar provides additional safety - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Breathable chinbar is covered with a durable injected PU foam - Removable cheek-pads (2 sizes included) allow you to achieve the perfect fit - BOA-FS1 Fit System with 360° head belt and vertical adjustments offer a customized fit - Fidlock Magnetic Buckle makes it easier to secure the helmet - 21 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications: CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

The MET Trenta 3K Carbon Mips® is a high performance road helmet designed with elite cyclists and worn to victory at Le Tour de France and the monuments of Liège-Bastogne-Liège and Il Lombardia. Engineered to keep your head fresh and save you energy with every pedal stroke, the MET Trenta 3K Carbon Mips® is the most advanced road cycling helmet we have ever made, now upgraded with the addition of Mips AIR®, the lightest and most advanced rotational management system.

The Garneau Klondike M3 Cycling Boot offers ultimate protection and keeps feet warm on long winter rides. - High volume fit last - Cordura 1680D with 400 g ThinsulateTM to resist cold temperatures down to -20°C/-4°F - Boa® IP1 with silicone elastic and neoprene opening with YKK zip - VIBRAM® DURATREK outsole - 3-layer construction insole with felt, 3 mm PE and foil

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

45NRTH Wölvhammer BOA® winter bike boots make year-round riding possible, with high-tech design and materials that stand up to snow and ice. Get yours here. Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals

Ride further, whatever the terrain, whatever the bike, whatever the destination. The Sidi Eagle 10 Mega is the best shoe for any day on the dirt, whatever your riding style. The Microtech upper, the first microfiber introduced in cycling shoes years ago by Sidi, is the most comfortable Sidi has ever offered, while the sole is designed to ensure the ideal combination of performance and comfort both on and off the bike. -The Sidi Mega Last provides Sidi fit and performance to riders who have slightly wider feet -The Sidi Mega Last is 4mm wider across the ball of the foot, has more volume, a higher instep and a wider heel cup -Mega lasts are sized EE to EEE -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep, ensuring an ideal fit -The Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The all new proprietary SIDI Wire monofilament is completely non-binding for intuitive and effortless on-the-fly adjustments -The integrated heel cup, with a new light weight design is reinforced to avoid deformation during the most grueling of rides -The reflective inserts on the heel improve safety on the road, helping to signal the presence of the cyclist in conditions of poor visibility -The shape of the tread has been specifically designed for mountain biking, allowing improved grip, superior mud dispersion and great stability -The toe inserts are easily replaceable and offer the ability to mount crampons for particularly muddy rides -The Sidi MTB SR17 sole represents an ideal balance of stiffness for efficient power transfer and flexibility and comfort for walking

Your rides are demanding: this jacket will keep you performing at the highest level in all weather. Honoring our first ever GORE-TEX jacket, which set the standard in 1985, this modern tribute signifies our commitment to continued excellence. - Reflective logo - Face fabric wetting out allows to quickly flap the surface dry - Revolutionary membrane construction eliminates face fabric preventing a chilling effect - GORE-TEX Active Product: Lightweight, extremely breathable, durably waterproof and windproof - Front zip pocket doubles as a stow-away pocket - Adjustable collar with Velcro for optimum fit and protection - GORE-TEX Active Jacket with new SHAKEDRY product technology - Wider, comfortable cut - Reinforced hem for easier closure of zipper - Enables more training and longer distances - Developed in conjunction with GORE Elite Athletes - Weight 116 gram (Size L) - Reflective print on sides - Elastic hem - 2-way front zip - Zip tags for easy opening - Ergonomically shaped collar

Out in The Great Nearby, whether by bike or by hike, the weather can be unpredictable. Which is why we've poured our combined technical know-how into our Räven Anorak. Fjällräven's classic Räven jacket with Specialized's on-bike-fit makes this the perfect jacket for both biking and hiking adventures. Features a torso in G-1000 Lite fabric. Four-way stretch on the back and lower sections provide wind resistance where it's most needed, as well as greater freedom of movement. Reflective details on the articulated, engineered sleeves have been optimized for bike riding. Two-way zippered ventilation openings in the sides. Secure zippered hand pockets and inside mesh pockets that are reinforced at the bottom. Two chest pockets with snap buttons—perfect for your wallet, phone, and other essentials. Easy to pull on, with an adjustable cinch at the hem. Stowable hood. Part of the Specialized/Fjällräven Exchange series for urban rides and bikepacking adventures. - Classic anorak pullover with a half zip opening. - Two chest pockets with snap closures. Left side chest pocket also has a secure-zipped entry. - Two secure zippered hand pockets. - Half-zip vents on either side with two-way zippers for breathability. - Adjustable hem cinch with locking cord pullers around the back hem. - Lightweight, packable hood stows in the back collar. Hood has a cord-pull adjustment around back of head. - Reflective details at hip and sleeve opening. - Articulated design for riding position.

Out in The Great Nearby, whether by bike or by hike, the weather can be unpredictable. Which is why we've poured our combined technical know-how into our Räven Anorak. Fjällräven's classic Räven jacket with Specialized's on-bike-fit makes this the perfect jacket for both biking and hiking adventures. Features a torso in G-1000 Lite fabric. Four-way stretch on the back and lower sections provide wind resistance where it's most needed, as well as greater freedom of movement. Reflective details on the articulated, engineered sleeves have been optimized for bike riding. Two-way zippered ventilation openings in the sides. Secure zippered hand pockets and inside mesh pockets that are reinforced at the bottom. Two chest pockets with snap buttons—perfect for your wallet, phone, and other essentials. Easy to pull on, with an adjustable cinch at the hem. Stowable hood. Part of the Specialized/Fjällräven Exchange series for urban rides and bikepacking adventures. - Classic anorak pullover with a half-zip opening. - Two chest pockets with snap closures. Left side chest pocket also has a secure-zipped entry. - Two secure zippered hand pockets. - Half-zip vents on either side with two-way zippers for breathability.

No matter if your feet are thin, medium or wide, Garneau's X-Comfort zone technology prevents numbness by extending the shoe's edges if needed. Having an internal lace system and a tight opening on the shoe's top avoids mud from sticking into the Baryum's fastening system. Get the best of both worlds with a stiff carbon outsole covered in rubber for optimal grip in any conditions. Heels and toes are protected with extra reinforcements so that you can head to the craziest trail sections with confidence. Technical Details - Shoe Technology: Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 12.7oz / 360g (size 42) - Outsole: Carbon and rubber outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Heel Retention: HRS-100 reinforced with 0.6mm membrane: Better heel positioning and reduced loss of power - Closure System: Boa L6 micro-adjustment

The most aero road helmet in the peloton now breathes better. The S-Works Evade 3 was reinvented from the inside out to cool better, making it the fastest choice for more stages. Through extensive Computational Fluid Dynamics and Win Tunnel testing, we created a rear "diffuser" that helps minimize drag and improve ventilation. The diffuser helps optimize aero performance by allowing air to release easier and improves ventilation by drawing 10% more air through the helmet at a given speed. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - Enlarged front vents help increase ventilation. - Rear Diffuser for aero and ventilation benefits. - MIPS Air Node is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - Dual-density optimized EPS foam.

The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous stages. With a never-ending quest to push the limits of ventilation, we eliminated air-blocking foam "bridges" from the center, effectively creating thru-air channels that increase the surface area of ventilation by 24.5% compared to the S-Works Prevail II Vent helmet. The all-new S-Works Prevail 3 has the most ventilation area of any helmet we have ever made. When a helmet is impacted, its job is to dissipate the energy of the impact. The conventional approach to helmet design is that more foam (EPS) means better energy management. We re-wrote the book on cycling helmet design by innovating beyond foam. Woven aramid "cables" traverse the helmet and are anchored to carbon fiber side panels. Upon impact, the AirCage technology* works as a suspension bridge and is designed to distribute localized forces throughout the helmet. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - AirCage innovation increases airflow. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - MIPS Air Node technology is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Occipital Base Adjustment optimizes comfort and compatibility with glasses. - ANGi-ready Mindset fit system for improved grip and reaction for easy on-the-go fit.

The Bluegrass Seamless B&S D3O® offers an experience unlike any other: unparalleled breathability, next-level comfort, and the ultimate protection. Designed for trail riding, enduro, and longer rides on your E-Mountain Bike. - 80% Polypropylene, 10% Polyamide, 10% Elastan - Seamless construction ensures adherent and ergonomic fit - Unisex fit to accommodate all body shapes - Dryarn® microfiber guarantees the highest level of performance for next-to-skin fabrics - Open mesh enhances ventilation and sweat evaporation - Quick-drying microfiber works to regulate body temperature - Dermatologically tested microfiber to eliminate bacteria and odor - Back protector D3O® BP4 L1 (removable) - Shoulder protectors D3O® T5 EVO X L1 (removable) - D3O® inserts compliant with EN 1621-2:2014 - Stable shoulder shells compatible with backpack straps - Two rear pockets for snacks and soft items - Lightness and flexibility gives you freedom of movement - Long-length bottom to be dressed into the pants maximizing stability - Hand wash only. Use only mild soap and water to clean your protector.

The MET Manta MIPS defines the MET aesthetic with its highly contemporary design and aerodynamic engineering. Featuring the MIPS-C2 rotational management system, the MET Manta MIPS is able to slide in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add at least 10% extra safety to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The Fidlock magnetic buckle makes it easier and faster to fasten the helmet. Despite being primarily an aero helmet it is also well ventilated. We've engineered the internal shape to channel the air, while MET's signature NACA Vent works in synergy with the specially positioned exhaust ensuring a constant airflow through the helmet, without catching the wind and creating drag. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Orbital Fit System - 360° head belt, and vertical and occipital adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - Fidlock Magnetic Buckle makes it easier to secure the helmet - 15 vents are internally engineered with an air channeling system to improve ventilation and comfort - Sunglasses ports securely dock sunglasses when climbing or resting - Tube-shaped tail to improve aerodynamics - Reflective rear stickers - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm

The MET Trenta MIPS a performance road helmet engineered to maximize ventilation and save you energy with every pedal stroke. Featuring the MIPS-C2 rotational management system, the MET Trenta MIPS is able to slide in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. Scientifically designed air vents harness the power of the Venturi effect, pushing out warm air within the helmet through specially positioned exhausts to ensure constant airflow. The tail of the helmet also features an aerodynamic design to effectively drive airflow. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Orbital Fit System - 360° head belt, and vertical and occipital adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - 19 vents and an internal air channeling system are engineered to improve ventilation and comfort - Sunglass ports securely dock sunglasses when climbing or resting - Tube-shaped tail improves aerodynamics - Limited contact with the surface of the head helps to maximize the ventilation - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

Made for winter hikes, snowshoe adventures, and long, cold days outdoors, the adidas Terrex winter boots are waterproof and fully insulated. COLD.RDY with PrimaLoft® wraps your foot in heat-sealing warmth, while RAIN.RDY seals out slush, snow, and rain to keep feet dry all day long. A BOA® Fit System lets you dial in a precise fit for confident footing. A BOOST midsole cushions and brings energy to every step, on and off the snow and in all temperatures. The Stealth winter grip rubber provides high-friction traction for confident footing on slick, icy ground. - BOA® Fit System for micro-adjustment, effortless on-and-off, and secure, consistent hold - Designed to insulate your body in cold weather — stay warm with adidas COLD.RDY - Waterproof textile upper with molded toe cap and external heel clip - PrimaLoft® Parley insulation keeps your feet warm all-day - adidas BOOST delivers incredible energy return and instant comfort with each step to keep you going