Parts

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, robust 60TPI construction, the 2x60TPI casing combines no-compromise durability, while retaining traction and support over the most rugged terrain. Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection DH:Wall – A butyl layer located within the casing ply, providing our highest level of sidewall defence.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

Bar end plugs are vital for any bike. The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

RaceFace Crank Arm Fixing Bolts - M15

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Replacement small parts for Hope disc brake Hope disc brake calipers.

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Converts Schrader rims to Presta - Rubber - Sold individually

Saddle clamp heads and lowers for KS Dropper posts.

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

- Model: Replacement bolt - Compatibility: Allen, M5x16

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- w/Nut - 1-3/4-inch

FSA Mega Exo Small Parts.

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Heavy duty and extra wide PVC rim strips for maximum tube protection.

- Type: Lock washer - Size: 1" Keyed