Electronics

Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location. - ANGi is a ride tracker, crash detector, and safety beacon. - Includes a one-year subscription to Specialized Ride Premium app. - Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates. - Additional premium features include start ride notifications and ride-time alerts. - Attaches to Specialized ANGi-ready helmets. - Approximate six months' battery life on a 2032 coin cell battery. - Weight: 10 grams w/ battery - Two-year sensor warranty

3-IN-1 Handlebar Mounted Accessory Holder: 3-IN-1 Design: - Headlights - Action Cameras (GoPro) - Garmin Computers (Compatible w/ Garmin Only) - Adjustable Angle (100 Degree Tilt Up/Down) - Materials: Aluminum Alloy, Nylon - Simple Installation Specs: - Length: 105mm - Width: 68mm - Height: 57mm - Weight: 76g - Snap Ring Fitment: 31.8-32mm Bars - Max Load: 400g

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

Versatile GPS and accessories forward mount. Multiple mounting options to maximize GPS and accessories placement. Composite matrix construction with aluminum arms. Bolts directly to stem faceplate. Lezyne X-Lock and GoPro mount compatible. Includes mounting hardware. - Direct X-Lock Mounting System not compatible with all stems.

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max XL combo mount is compatible with all Garmin Cycling Computers - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 63g

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.

Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.

Introduce the rider you are today to the one you’ll be tomorrow. The Edge® 840 touchscreen cycling computer offers targeted adaptive coaching when used with your compatible power meter and heart rate monitor. It helps you manage your efforts by providing power targets throughout a course plus stamina insights, so you know how much gas is left in the tank. Get superior accuracy under dense tree cover or the urban canyon, thanks to multi-band GNSS technology. It features button controls that work in any environment matched with a responsive touchscreen so you can tap, pan and swipe on the fly. Whether you’re riding roads, trails, gravel or indoor, you can benefit from insights and workouts that will help you understand your strengths and weaknesses and prepare for upcoming races or personal milestones.

Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Protective Silicone case for Edge 1040 and 1040 Solar

It sees what you can't. Varia RCT715 rearview radar with camera and tail light continuously records your ride and automatically saves footage before, during and after events if it detects an incident. The bright tail light makes you more visible to motorists. And Varia RCT715 integrates seamlessly with your Garmin bike computer or the Varia mobile app on your paired compatible smartphone to alert you to traffic as you ride. The app allows for live video viewing for camera setup, plus video transfer so you can replay footage postride. A selection of operation modes lets you flex camera and tail light features to maximize battery life for longer rides.

Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation

Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to an aero or round seat post with this quarter-turn mount. Includes mount, 2 fitting shims and 4 O-rings.

Instant bike dashboard Enhance your riding experience while delta keeps your mobile phone safe. Whether cycling is a new hobby or you're an avid competitor, riding a mountain bike or a classic two-wheeler, this phone holder will provide full-screen visibility and hands-free access to ensure maximum safety for you AND your smartphone, while on the road! Features Mobile Phone Compatibility - Bicycle mobile phone mount compatible with phones up to 2.9 inch wide, .625 inch depth, 6 inch length (up to iPhone X and Samsung Galaxy 9 non plus + versions). Secure Mobile Phone Mounting - Weatherproof bungee and rubber inserts keep phone secure while delta’s patented cam lock provides added security for your mobile phone on rough terrain. Easily Accessible - Sliding system allows for easy in/out while on the go, stop for an important call, adjust navigation, and never worry about missing the perfect photo opportunity while riding. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Weight - 0.14 lbs / 65 grams

Instant bike dashboard Perfect for any enthusiast, Delta's bicycle phone mount allows you to securely display your mobile device while riding. Using a built-in lock mechanism, your plus-sized smartphone is secured safely with multiple grip points and bumpers, to prevent shock and reduce vibration on rough terrain. Adjust the angle of display for convenient viewing while riding to easily access navigation, answer that important call or stop for the perfect photo opportunity. Features Securely Displayed - Weatherproof bungee and rubber inserts keep phone secure and protected while Delta's patented cam lock provides added security for your mobile phone on rough terrain. Compatibility - Bicycle mobile phone mount compatible with phones 3.5 inch wide x 0.5 inch depth x 7.8 inch length (up to iPhone 8+ Plus and Samsung Galaxy 9+ plus). Easily Accessible - Sliding system allows for easy in and out while on the go, so your phone is available for an important call, adjusting navigation, and you'll never have to miss the perfect photo opportunity. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm Weight - 0.17 lbs / 80 grams

From daily commute to weekend ride, the CatEye AirGPS is ideal for anyone who wants to measure time, speed and distance. Simply click through to a different data field and transfer your ride data to your Smartphone via App to upload to supported platforms. - Sensorless GPS computer - Simple setup via smartphone app - 3-row display. Middle and lower row display programmable by smartphone. - Backlight (Night mode) - Hassle-free operation. ClickTec™ button interface, and automatically saves ride data by powering off. - 10hrs runtime - Stores up to 80 hours worth of route recording - Import ride data to Cateye Cycling™ and view it on app

- Dual band Bluetooth and ANT+, magnetless sensor with integrated accelerometer - Quick pairing with CatEye Cycling app (Bluetooth) - Waterproof IPX7 (based on JIS C0920) - Works with Padrone Digital, Padrone Smart+, Padrone Smart* and Strada Smart* *For Padrone Smart and Strada Smart, works in Mirror Mode only

From the downhill mountain biker to the farsighted cyclists, the Padrone is ideal for anyone who wants to enjoy a squint-free ride and a fast, simple set-up. - Analog wireless - Large display and sleek design - Auto start/stop - Menu screen to change setting - ClickTec button interface - Programmable odometer - Battery indicator - FlexTight universal bracket

The Padrone features a large bike computer display, making it easy to see in all conditions. - The Padrone features the following measurements: Current/ average/ maximum speed, total distance, trip distance, elapsed time, clock, and stopwatch - Its large display size makes it easy to read while riding - Easy to set up, read and use - ClickTec button interface for easy use - Analog wireless computer - Programmable odometer - Auto start/stop - Menu screen to change setting

The Velo 7 is CatEye’s entry level wired 7 function bike computer made simple with pre-programmed tire sizes.

The Beetle X Phone Bag is designed to place any phone on your Top Tube or Stem for easy access to your phone, energy bar, phone, wallet, or other small items. Any smartphone with or without a case will fit (iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone 10, etc.). - 4 multi-positional straps for mounting - Straps are extra-long, so cut to the desired length - Fits the largest phones with large cases - Phone is operable & audible while in the case - Good size for wallet, energy bar, and wallet - Made of 840 denier nylon & polyester - 7" x 3 1/2" x 2 1/2"

Molded with Polycarbonate and Silicone rubber. Mounts to bike frame with rubber oring or use braze ons on bike. The 2 elastic bands will hold a phone, energy bar, pump, or sunglasses.

Using super heavy duty rubber, the TrailKASE is designed to conveniently fit any size phone with or without a case on your bicycle while you ride! Using an 1/8 turn (10 o’clock to 12 o’clock), the TrailKASE securely attaches to the handle bar bracket (included). By simply wrapping the rubber case around all 4 corners of your phone, your phone is secure and provides 100% visibility to your screen.