Tires/Tubes

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, robust 60TPI construction, the 2x60TPI casing combines no-compromise durability, while retaining traction and support over the most rugged terrain. Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection DH:Wall – A butyl layer located within the casing ply, providing our highest level of sidewall defence.

- Ramped center knobs - High shoulder blocks - Available in two Plus sizes

- Comfortable ride - Classic colors

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

Type: Patch Cement Size: Individual tube

Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag. - Kit contains (6) pre-glued 1? patches and a scuffer.

- Anodized alloy construction - Fits standard Schrader valves

• Includes a plastic storage box, 6 patches, cement, and scuffer

- Forged alloy construction - Fits Schrader valves

Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

- 0.9mm Wall thickness - 700 x 18-25C = 27 x 1 - 700 x 28-35C = 27 x 1-1/8, 1-1/4 - Compliant with California Proposition 65

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve

- Shim adds support to Presta stem used in a Schrader rim

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

- Butyl rubber - Economy tube - Schrader valve - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Schrader valve - Removable valve core - Wall thickness: 0.9mm

Kenda Presta valve tubes are dependable replacements. Use them to build up your bike, and throw a spare in your bag so you can keep on riding.

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Decreased air loss design - Butyl rubber - 40mm valve length